6202 Deep Groove Ball Bearing 15x35x11mm

The 6202 bearing is the most widely specified 15mm-bore deep groove bearing in small motors, pumps, and power transmission. At 35mm OD and 11mm width, it carries 7.65 kN dynamic load, 12 percent more than the 6201 bearing from only 3mm additional bore. For design teams moving up from a 12mm shaft, the 6202 bearing is the standard 6200-series step that keeps housing OD under 40mm.

Key Specifications

• Sealing: Open, ZZ (non-contact metal shields), or 2RS (nitrile rubber contact seals). Three configurations for oil-bath, dust-protected, and wet operating environments.
• Speed and Load: 18,000 RPM (open) with 7.65 kN dynamic and 3.75 kN static load. 2RS rated to 14,000 RPM due to seal lip drag.
• Dimensions: 15mm bore x 35mm OD x 11mm width. 10mm radial cross-section balances load capacity against housing envelope for compact motor designs.
• Temperature Range: -20C to 120C continuous with standard polyurea grease. 150C peak with high-temperature synthetic grease on OEM request.
• Precision: ABEC-1 standard. ABEC-3 and P6 (ISO class 6) available for reduced noise and vibration in electric motor applications.