6801 Deep Groove Ball Bearing 12x21x5mm
At Yuanhe the 6801 runs through CNC grinding, ultrasonic cleaning and automated assembly under ISO 9001. Bore, OD and width are verified on each bearing before it ships.
When a 12mm shaft must fit within a 21mm OD housing, the 6801 bearing is the thinnest option in its bore class. At 12x21x5mm, it saves 3mm OD and 1mm width versus a 6901 bearing (12x24x6mm), trading load capacity for the smallest possible envelope. This page covers the 6801 bearing specifications, sealing options, speed capabilities, and the design decisions that justify choosing it over wider 12mm-bore alternatives.
For any inquiries, please contact with our Supporting Team at sales@yuanhecd.com.
At Yuanhe the 6801 runs through CNC grinding, ultrasonic cleaning and automated assembly under ISO 9001. Bore, OD and width are verified on each bearing before it ships.

| Model | 6801 |
| Bore (d) | 12 mm |
| OD (D) | 21 mm |
| Width (B) | 5 mm |
| Type | Open / Shielded / Sealed |
| ABEC | ABEC-1 / ABEC-3 |
| Dynamic Load | 1.92 kN |
| Static Load | 1.04 kN |
| Max Speed | 36,000 RPM (open/ZZ) |
The 6801 bearing is a thin-section deep groove ball bearing with 12mm bore, 21mm OD, and 5mm width. Available in open, ZZ (metal shields), and 2RS (rubber seals) configurations. At 1.92 kN dynamic load and 36,000 RPM in open/ZZ configuration, it is the fastest 12mm-bore bearing in its class. The 2RS sealed variant derates to approximately 1.47 kN and 22,000 RPM for contaminated environments.
Bore x OD x Width
12 x 21 x 5 mm
Dynamic Load Cr
1.92 kN
Static Load Cor
1.04 kN
Max Speed
36,000 RPM
Sealing
Open / ZZ / 2RS
Precision
ABEC-1 / ABEC-3
Three sealing configurations serve different environments. Open 6801 bearings run at 36,000 RPM with no seal friction, requiring external lubrication and a clean housing. ZZ bearings use non-contact SPCC steel shields pressed into the outer ring on both sides; they retain factory grease without adding drag, preserving the full speed rating. 2RS bearings use nitrile rubber (NBR) lip seals that press against the inner ring, blocking moisture and fine dust at the cost of friction, lowering the speed ceiling to approximately 22,000 RPM.
At 5mm width, the 6801 bearing carries a small grease reservoir. For applications running above 30,000 RPM such as dental turbines and high-speed spindles, open or ZZ configurations are the correct choice. The 2RS sealed configuration extends service intervals in wet or dusty environments but imposes a 14,000 RPM speed penalty versus the open variant.
Within the 12mm-bore bearing family, the 6801 bearing is the thinnest-section option. The 6901 bearing (12x24x6mm) reaches 2.89 kN dynamic load, a 50 percent increase, at the cost of 3mm additional OD and 1mm width. The 6001 bearing (12x28x8mm) delivers 5.10 kN but adds 7mm OD and 3mm width. The 6801 bearing trades load capacity for minimum envelope: 1.92 kN dynamic and 1.04 kN static in open or ZZ configurations. At 36,000 RPM, it is the fastest bearing in the 12mm-bore class.
Yuanhe manufactures 6801 bearings to customer specifications. Custom internal clearance grades C2, CN, and C3 are available for volume orders. Low-noise grease fills (V2 or V3 vibration class) support quiet-operation requirements in medical handpieces and precision instruments. ABEC-5 and ABEC-7 precision grades are available for dental turbine spindles and optical encoder applications. 440C stainless steel rings and balls provide corrosion resistance. Standard OEM lead time is 7 to 15 days. Send bearing dimensions or part number requirements to contact Yuanhe for a quote.