Home > Deep Groove Ball Bearing > 695 ZZ Miniature Deep Groove Ball Bearing 5x13x4mm

695 ZZ Miniature Deep Groove Ball Bearing 5x13x4mm

Double metal shielded, grease-lubricated miniature bearing for high-speed applications. 5mm bore, 13mm OD, 4mm width. ABEC-3 precision tolerance, 47,000 RPM max speed.

Key Specifications

Double metal shields (SPCC): non-contact, low friction
47,000 RPM max speed; 0.2kN dynamic, 0.43kN static load capacity
Radial and axial loads in both directions
Operating temperature: -40°C to 120°C
Chrome steel (GCr15), ABEC-3 precision tolerance

Inquiry Now Download PDF

For any inquiries, please contact with our Supporting Team at sales@yuanhecd.com.

695 ZZ bearing

The 695 ZZ miniature deep groove ball bearing features double metal shields for low-friction high-speed operation. 5mm bore, 13mm OD, 4mm width. ABEC-3 precision tolerance, 47,000 RPM max speed.

Model	695 ZZ
Type	Shielded
Bore Dia (d)	5 mm
Outside Dia (D)	13 mm
Width (B)	4 mm
ABEC Tolerance	3
Dynamic Load Capacity (kN)	0.2kN
Static Load Capacity (kN)	0.43kN
Max. RPM	47,000RPM
Temp. Range (℃)	-40~120℃
Material	Steel
Shield Material	SPCC steel (non-contact)
Lubrication	Grease

The 695 ZZ miniature deep groove ball bearing features double metal shields for low-friction high-speed operation. 5mm bore, 13mm OD, 4mm width. ABEC-3 precision tolerance, 47,000 RPM max speed.

Bore x OD x Width

5 x 13 x 4 mm

Dynamic Load Cr

0.2 kN

Static Load Cor

0.43 kN

Max Speed

47,000 RPM

Shielding

ZZ Metal

Precision

ABEC-3

Shielding and Lubrication

The ZZ designation indicates double metal shields (SPCC steel) pressed into the outer ring on both sides. These non-contact shields form a narrow labyrinth gap that blocks coarse dust and debris while generating lower friction than rubber contact seals. The bearing is factory-packed with grease. For wet or dusty environments, a 2RS sealed variant provides tighter contaminant protection.

Performance

The 695 ZZ miniature deep groove ball bearing uses a single-row raceway profile that takes combined radial and axial loads within a compact 5x13x4mm envelope. Rings and balls are GCr15 chrome steel, hardened and ground to ABEC-3 tolerance. This bearing sits in the deep groove ball bearing lineup at Yuanhe, spanning bore sizes from 3mm to 100mm. Dynamic load rating 0.2kN, static load rating 0.43kN. Rated for 47,000 RPM with low noise characteristics. The non-contact metal shield design reduces running torque, consistent with precision bearing production methods.

OEM and Customization

Internal radial clearance options (C2, CN, C3) and custom grease fills available for production quantities. Batch traceability is maintained throughout manufacturing; dimensional inspection reports and material certificates ship with volume orders. Submit your bearing specification for pricing and lead time.

Applications

Small electric motors

Cooling fans and blowers

Power tools

Office equipment

Printers and copiers

Hobby servos

Model aircraft

Automotive sensors and throttle bodies

Frequently Asked Questions

FAQ

What clearance options exist for the 695 ZZ bearing? +

The 695 ZZ ships with standard CN clearance. C2 (reduced) and C3 (increased) clearance grades are available for volume orders. C3 suits applications with press-fit mounting or thermal expansion. Contact Yuanhe with your running conditions for clearance recommendations.

How does the 695 ZZ metal shield protect the bearing? +

The ZZ designation means double SPCC steel shields pressed into the outer ring on both sides. These non-contact shields form a labyrinth gap that blocks dust, dirt, and larger contaminants while allowing the bearing to run at full speed. The shields do not touch the inner ring, so there is no friction penalty from the shielding.

What is the temperature limit for the 695 ZZ? +

Standard 695 ZZ bearings operate from -20C to +120C with standard grease. High-temperature grease raises the upper limit to +150C. For applications near the temperature limits, specify stabilized heat treatment and appropriate grease grade. Contact Yuanhe for extreme-temperature configurations.

What shaft tolerance fits a 695 ZZ bearing? +

The 695 ZZ has a 5mm bore with standard tolerance. For press-fit mounting on shafts, use an h5 or j5 shaft tolerance for light loads. For slip-fit applications, use g5 or f6 tolerance. The housing bore should use H6 or H7 tolerance. Always check the actual fit after mounting to verify running clearance.

,”url”:”https://www.yuanhecd.com/695-zz-miniature-deep-groove-ball-bearings/”}